Water Heater Winterizing

Posted by on Dec 1, 2014 in Water Heater Repair Riverside, Water Heating Savings

We love to pass along tips on how to conserve on energy expenses at home here at Water Heater Repair Riverside. Here are some of the best ways to get ones water heater ready for the winter months.

A simple method to examine ones water heater’s need for insulation is to put ones hand near to or on the outside of the storage tank. It is feels warm, insulating the tank is suggested. Throughout the winter season this heat loss you just felt can accumulate. Conversely in the summertime, if the water heater is located inside the home, and not in a garage, it can add heat to the space that you are trying to cool. The heat you feel is clearly heat being lost. If it is not warm at all that is a good indication that the tank’s internal insulation is in pretty good shape. Brand-new water heaters are being produced with a great quantity of internal insulation today. You can inspect the manufacture’s label to see what the R-value is. If it R-24 or greater, one should be in fantastic shape without having to add an insulation blanket to the water heater.

Riverside Water Heater Blankets

The treatment for this heat loss is with a water heater blanket or wrap. Initially check with your local energy company, for some have insulation kits at minimized costs for house owners. A hot water heater blanket will come in various sizes depending on the gallon size of the storage tank. The higher the R-value, the more insulation it has. We would suggest getting at least an R-11.

The blankets are easy to set up. They will come with insulation tape to finish the joints of the blanket. The shinny or vinyl side goes on the outside.

For gas water heaters, wrap it all around, leaving the top flue unwrapped, and unwrapped around the controller on the bottom. Likewise, do not wrap the T&P valve lever, or the bottom of tank for that is where air gets in. For electric water heaters, the top can be wrapped for there is not an exhaust flue, but do not wrap the heating-element access panels.

Water heater blankets will last a long period of time. You might even be able to make use of the very same one once more whenever the water heater is replaced, providing it’s the same size storage tank.

Water Heater Pipe Insulation

There are two kinds of pipe insulation that ought to be used for a water heater. For pipes that are within 6 inches of the water heater exhaust flue, fiberglass insulation wrap should be used and ought to be attached with either high temperature aluminum tape or wire. Foam insulation sleeves can be made use of for all the pipes that are further away then 6 inches of the flue then.

The U.S. Department of Energy recommends that house owners insulate a minimum of 6 feet of the pipe entering and out of the water heater. This will increase the temperature level at the faucets 2 to 4 degrees and conserve money on heating. We also recommend wrapping both the hot and cold pipes too simply due to the fact that every bit helps.

Energy Savings from Riverside Water Heater Insulation

Insulating an ineffective hot water heater can cut the expense of running that heater by 5 % to 10 %. Depending on the model, that can save anywhere from $5 to $20 per year, which means a water heater blanket can be paid for in 1 to 4 years. Adding insulation could decrease standby heat losses by 25 % – 45 % and conserve about 4 % – 9 % in water heating costs.

What others round the web are saying: