Blog

Advice and tips for homeowners on how to best take care of their water heater from Water Heater Repair Riverside.

Total Water Heater Maintenance Tips

Posted by on Jun 12, 2015 in Gas Water Heater Repair Riverside, Water Heater Repair Riverside, Water Heater Use and Care | 0 comments

Water Heater Repair Riverside is not about to talk about the regrettable testimonies regarding water heater maintenance of “stumbling out of bed to the chilled bath,” here. Likewise, we are going to presume that one is aware of the basic concept of making certain ones water heater is maintained regularly to be able to receive the most from its life time. This may help one cut costs on energy costs as well. All of that is wise we realize. Although hot water heaters don’t need a lot concerning maintenance (and we are amazed, even though not shocked, by the quantity of customers we come across who have not carried out anything to their water heater), listed below are the duties people must be aware of when it comes to routine maintenance.

How Long Should My Riverside Water Heater Last?

The standard gas water heater can last 8 to 10 years. There are lots of variables that can have an impact on the general lifetime obviously, however this is an excellent standard. Perhaps the largest aspect which will impact the long life of it is usually mineral deposits. Several of the tips below should go a long way in assisting to lessen the accumulation of mineral deposits inside of the storage tank of the water heater.

Riverside Water Heater Repair PreventionHot Water Heater Repair Riverside

Property owners, even individuals which never feel excessively handy, are able to do plenty of water heater preservation on their own. However more often than not, water heaters are risk-free, it is critical to be aware of that they actually operate from electrical power and/or gas, thus appropriate safety guidelines must be observed. Remember to apply these tips as an informative tutorial, for we’d much rather demonstrate all these together with you directly. The electric power to the water heater requires to be switched off prior to performing any servicing. Ones breaker box ought to have a ideally labeled switch to reveal which breaker is the heater’s. With a gas heater, turn the gas cutoff counterclockwise to switch off the gas to the device.

The section of the heater that assists with protecting against rusting within the water storage tank are the anode rods, or additionally termed sacrificial anode rods. A good number of are composed of aluminum or magnesium around a steel wire. With time the external covering of the rods will erode and they need to be replaced as soon as the steel wire is obvious. They commonly last around 5 years, though that could be reduced if ones water is soft. Over the long haul, it is simpler and more affordable to have the anode rods changed, to be able to obtain an extended life from the water heater storage tank. The rods ought to be inspected each year basis.

The follow video does a good job of showing the procedure needed with replacing the anode rods:

Not every water heater has dip tubes. They must be checked out for deterioration every 6 months. To test it, take it out and check its length to the height of the water heater. It ought to be roughly 6″ to 8″ shorter as compared to the tank. When it’s smaller than that, or possibly exhibits symptoms of breakage or falling apart, it’ll need to get changed.

The big and small flush. Once again, mineral deposits are the primary reason of water heater malfunctions. Based on the level of quality of water in ones household will establish just how quickly sediment will build up on the inside of the storage tank. This sediment can solidify with time, leading to peculiar popping sounds from the storage tank, lessen the effectiveness of the device, and possibly block the drain valve. Ideally, every 6 months, but a minimum of yearly, empty 1 or 2 gallons of water from the drain valve in the bottom of the hot water heater in a pail or by a hose in a container outdoors. Look to observe just how much sediment is within the pail when the water settles. If it appears to be relatively clear, that great! When these types of small flushes are executed two times annually, one might not need to do a big flush as frequently. If the water appears very dirty, a full flush needs to be done. This is certainly likewise a great occasion to be certain the bottom drain valve of the storage tank is operating nicely and not leaking. They are commonly made from plastic and after a while when they aren’t opened up, they are going to get stuck or not close up securely, so opening and closing them throughout the small flush test is very good.

There can be various techniques one may take through flushing to manage any sort of water smells which may arise when hot water comes from faucets within the house also.

This video indicates exactly how and reasons behind a water heater flush:

Pertaining to holiday or temporary households, one ought to empty the storage tank of all its water to avoid any kind of flooding when the residence is not being occupied. Of course, ensure to fill it up whenever the household is to be resided in once again.

Water pipe inspection. Analyze to make certain all water piping don’t have leaks or are harmed at all. It ought to be simple to see when there are any leaks coming from any section of the water plumbing or storage tank for one will see water beneath and/or close to the device. Leaking water could potentially cause water damage to elements of ones residence, so make certain all appears dry, particularly if the heater is placed inside of the house and not in a garage.Riverside Water Heater Repair

T&P valve check. The T&P valve, also referred to as the temperature and pressure relief valve, really should be examined every year. The function of the T&P valve would be to defend the water heater storage tank from surplus pressure, and exploding, not to frighten anybody. The owners guide ought to be looked over to make certain the appropriate ways are implemented but listed below are the standard measures. A little water can come out of the valve and will probably be really hot so take care. Lift up the handle and let go of it. Have a container all set to catch any unwanted water which can come out. Additionally, the noise of pressure getting discharged will be observed. The handle ought to snap back in position. In case it does not give it a try once more. When it will not go back again into position following several attempts, it is going to have to be changed. The valve may perhaps drip a little water after doing that for a little while. If it doesn’t quit dripping after several hours inform us.

There exists a great deal of discussion around what the finest temperature setting should really be. The manufacturer pre-programmed setting is often 140 degrees, which is actually warmer than the majority of people may ever require. 120 degrees is the ordinary temperature and some individuals actually go as far as 100 degrees. We are publishing much more on this issue shortly, but we would suggest not going over 120 degrees.

Just For Gas Water HeatersWater Heater Repair Riverside

The gas venting system requires being examined each 3 months. Take a look at to ensure all fittings are tight and for obstructions and deterioration to the vent pipes in addition to being sure these are totally free of rust and deterioration .. Gas fired hot water heaters vent fumes to the outdoors of the residence. If these fumes flow inside of the property it could be fatal and a fire risk. Make certain everything combustible or corrosive is far from the exhaust ventilation to help alleviate problems with fires. Change all loose, broken or corroded portions of vent pipes.

Look at the pilot light to complete a visual diagnosis of just how it is working. The pilot light is the component that ignites the gas burner which heats the water. A clean burning and correctly adjusted pilot light is necessary for your water heater to function at peak efficiency. The color of the flame of the pilot light really should be blue with natural gas heaters or blue/green with just a bit of yellow at the tip with propane heaters. A weakened flame, a yellow flame, or a flame which has a divided flame on the top signifies that a realignment is required.

Just For Electric Water Heaters

Making use of insulation wraps or covers around the storage tank can help preserve a continuous temperature inside of the storage tank without needing as much electric power. In addition, with the heater not needing to operate as much will lengthen the life span of the heating element seeing that it will not be utilised as much. Every 3 months approximately, check out to be sure the insulation cover remains attached properly and hasn’t fallen or shifted on the water storage tank.

Regular examination of the heating element is extremely important and can help minimize the need for an unexpected emergency repair. We aren’t going to get into the particulars for a complete examination in this article, however one will require a voltage/OHM meter to guarantee there exists a closed electrical circuit. Heating elements will need changing sometimes.

Continue to keep the vicinity about ones water heater thoroughly clean of dirt. Primarily if the water heater is placed in the garage area, be sure to keep the place swept. The cleaner the heater is, the far better it is going to run without having the requirement of a water heater repair.

Replace Old Water Heaters With Energy Efficient Ones

Today, virtually all water heaters manufactured have got a good quantity of energy efficiency. In April of 2015, new rules were set up in the United States on water heaters. Naturally, the better the heater, the longer the life one is certain to get from the device using the suitable upkeep through the years. Don’t think twice to contact Hot Water Heater Repair Riverside to talk about water heater maintenance or possibly to help answer any queries on picking out the most suitable replacement water heater for ones residence or workplace. Brand, model, and size really need to all be considered in the course of the selection process and not merely utilize the “bigger the better” slogan. Regarding storage tank water heaters, one will not desire to be continuously preserving a surplus quantity of hot water that won’t be used.

Diagnose a Gas Water Heater Not Heating

Posted by on May 20, 2015 in Gas Water Heater Repair Riverside, Water Heater Repair Riverside | 0 comments

A great majority of the water heaters Water Heater Repair Riverside receives repair requests for are gas water heaters. These are undoubtedly the most favored type. Listed here are a number of self diagnostic steps one can check out if the gas water heater is just not heating water in any way.

How to Self Diagnose a Riverside Gas Water Heater Repair

This can appear evident, yet verify to be certain the gas to the water heater is switched on. Move the gas control knob to PILOT to stop the burner from igniting while looking within. Take off the metal cover at the lower part of the water heater and take a look to check if the burner along with the pilot light are ignited.

If the water heater’s pilot light has gone out, adhere to the directions on the storage tank to relight it (we have the standard measures to do this outlined below). There exists a chance that the gas inlet valve may be shut to some extent or entirely. If that is the fact, simply turn the handle parallel to the line and ignite the pilot. If the pilot continue to not ignite, then the problem might be with the thermocouple. Many current water heaters possess a glow plug or spark igniter rather than a pilot. Check out the owner’s guide for a reference point.Gas Water Heater Repair Riverside

If the burner is not on, replace the cover and ensure the thermostat is establish around 120 degrees F. If it is not, correct it, run on a hot water faucet in close proximity to the water heater, then wait around a little bit to verify if the water heater burner ignites. If it doesn’t ignite, keep the hot water running and try out decreasing and then increasing the temperature setting on the dial until eventually the burner ignites.

In the event that the burner ignites, replace the cover and switch the thermostat back again to a suitable setting. If the burner will not ignite, allow us to examine the water heater. The heater’s thermostat could be malfunctioning. A thermostat switch ought to be executed by us.

Do you smell gas? If a smell much like garlic is observed, switch the gas valve control to the OFF placement. Hang on and determine if the gas odor is gone prior to relighting the pilot. If it does not pass, quickly switch off the gas supply valve, air out the area as best as you can and phone the gas utility company.

Pilot Light Doesn’tStay Lit

Attempt to relight the water heater initially. In fundamental terms, move the water heater’s gas valve to the OFF status then to the PILOT status. Push the pilot button down to be able to light it, and then hang on until a status light indicates the dial may be changed from PILOT to ON.

In the event that the pilot light continues going out, it is also possible the orifices might be unclean and blocked, which could make the flame too tiny to remain lit. Verify to make certain there is no evident dirt and debris clogging it.

In cases where everything seems clean, the issue might be with the thermocouple. This is the component that runs from the temperature control right into the flame of a pilot light and facilitates the main burner fire up as soon as the water temperature has moved too low. The pilot light may be impacted if the thermocouple is defective or fails to come into contact with the pilot flame. Various home owners might feel safe changing a thermocouple, but Gas Water Heater Repair Riverside would rather you call us to help.

Reduced gas pressure or a not working gas control valve may also lead to a pilot light to go out frequently. Call us if you believe this is the situation.

Water Heater Sediment Removal

Posted by on May 12, 2015 in Gas Water Heater Repair Riverside, Water Heater Repair Riverside | 0 comments

If you have a trouble with sediment, you’re most likely currently mindful of it. Gas fired water heaters in certain frequently show that there is a sediment issue with rumbling sounds each time the tank cycles, while still keeping excellent water temperature level. Thankfully, sediment can quickly be eliminated, and help prevent the need for a Riverside water heater repair.

If you have a gas water heater, turn the control to pilot. If you have an electric design, you ought to shut off the electrical power at the panel. Next shut down the water above the heater so no brand-new water can get in the tank. Then affix a hose to the drain valve. The various other end of the hose must ideally go to a floor drain, although a pail can likewise be made use of.Hot Water Heater Repair Riverside

Open the drain valve to eliminate all the water from the tank. The majority of the sediment ought to be gotten rid of by this easy act. Keep the drain valve open, however switch on the water too, permitting some to get in the tank. Turn off the water after a couple of minutes. Repeat this numerous times to coax as much sediment out with the water.

As a last procedure, close the drain and fill the tank a minimum of half full. Then you can drain it for a last time to get rid of any last remains of sediment. To avoid more usual sediment issues, you can set up a sediment filter for your tank if your trouble is primarily with sand. A sand filter need to be set up on the cold trunk line.

In some cases sediment can likewise congest the drain valve itself. Preferably you ought to have the ability to wash the valve out under high pressure, however in some cases the valve requires to be changed after a cleaning. You can achieve this job while the tank is still complete, simply switch off the gas or electrical energy and await the water in the tank to cool. You must likewise not make use of any water in your residence will finishing the replacement.

To eliminate the drain valve, merely utilize a huge groove joint pair of pliers to turn off the old valve. Then set up a replacement valve by turning it in clockwise. Make certain to make use of pipe thread sealing tape or pipe joint substance on the threads to make sure that the connection will prove out.

If you are preparing to get rid of the drain valve, you could think about prior to setting up the replacement valve offering your tank a last flush. This is finest done if you have a floor drain that will rapidly drain the water and sediment.

The follow video illustrates this process:

Lots of individuals incorrectly think that a sediment filled tank or a dripping drain valve is source to change the whole hot water heater. By these basic upkeep actions, many residents need to have the ability to take care of any troubles on their own. Naturally, Water Heater Repair Riverside is here to assist with this or any other water maintenance that should be completed for you.

Have a look at a few of our additional related water heater repair and maintenance articles:

Best Water Heater Temperature Setting

Water Heater Winterizing

Solar Water Heating Options

Posted by on May 5, 2015 in Solar Water Heaters Riverside CA, Water Heater Replacement Riverside | 0 comments

A lot of people look at the field of alternative energy and the idea of going eco-friendly as a trend, and one that could be not any longer popular. Although that could be the situation for some individuals, the importance for not only us in the United States to be much more energy sensitive, but as a global society, continues to be a requirement. This post is not intended to be a complaint of a lot of people not becoming energy mindful enough, rather a chance to check out the solar energy possibilities for water heating.

Solar water heating is a workable option for many of us, and has grown considerably more of a method regardless of the area of the United States one resides in as technology continues to grow. A fine example of this of this position is to observe Germany. With regard to climate and the accessibility of solar energy, Germany is comparable to Alaska. However, Germany is an innovator in solar energy research, advancement and use. As a country, Germany made the choice to do this, and it is performing nicely for them. Having said that, the capability for property owners in any portion of the U.S. to take advantage of applying solar energy, and not only for water heating, is an alternative.Solar Water Heaters Riverside CA

While technologies grows and much more common in the U.S., the equipment expenses for using solar water heating will proceed to decrease, which in turn will help make it a less costly option for the ordinary home owner. Considering the April, 2015 brand new water heater specifications in the United States, the price of the majority of new water heaters has grown. Nevertheless, the brand new water heaters made are going to be even more energy efficient, and that is a positive.

According to SEIA, more than 9 million U.S. household water heaters are changed on an annual basis. That is good information to generating a more sustainable world. A good number of home solar water heating systems may be set up in a day.

The 2 forms of solar water heating systems are active systems and passive systems. Active systems take advantage of an electric pump to circulate the water. These are the most typical in the U.S. for both residential and commercial use. Passive systems implement thermodynamics to move the water. One can find several versions of the 2 main types of systems that we will not talk about in this article, although the U.S. Department of Energy has great info about them here.

Solar water heaters are made up of 3 primary components: the solar collector, insulated piping, and a hot water storage tank. Electronic controls might also be included, along with a freeze protection system for cooler areas. Solar radiation arrives at the solar collector, the solar collector absorbs the heat and transfers it to potable water in the system. Flowing out of the collector into a hot water tank, the heated water is accessible and utilized on demand. Either system may offer up to 80 percent of the required hot water requirement of a house or building. A common dwelling may lessen its CO2 impact by an average of 28 percent then as well.

Sizing a Riverside Solar Water Heater System

Residential solar water heater systems are usually sized comparable to that of a standard water heater, by the quantity of hot water generally utilized. A property that might utilize 50 gallons of hot water on a daily basis can take advantage of a 2 solar panel system. Water heater installment businesses just like Water Heater Repair Riverside have unique methods we utilize to help identify the solar panel sizing for the quantity of hot water necessary a day, per location.

Parts of a Solar Water Heating System

Solar water heating systems comprise a solar collector, insulated piping, heat transfer fluid, a hot water storage tank, and a system controller. Solar water heating systems operate as follows:

The solar collectors absorb sunlight, causing the fluid inside to heat up.
A controller senses that the collector fluid is hotter than the storage tank and signals a pump to turn on.
The pump circulates heat transfer fluid which carries heat from the collector to the storage tank.
The storage tank holds the heated water which is used as necessary. Auxiliary heating remains connected to the storage tank for back-up heating when needed.
http://www.seia.org/research-resources/solar-heating-cooling-energy-secure-future

According to the Union of Concerned Scientists, solar water heating systems cost $2,000 – $5,000 to be set up. One can find various state governments and local utilities incentives obtainable also. They have links on their website here with information about incentives. With normal maintenance and inspection, a solar water heater system may last 20 to 30 years with nominal maintenance and costs.

Best Water Heater Temperature Setting

Posted by on May 5, 2015 in Gas Water Heater Repair Riverside, Tankless Water Heater Repair Riverside, Water Heater Repair Riverside | 0 comments

Today Water Heater Repair Riverside CA is going to be taking a look at the different ideas on exactly what temperature level a water heater should be established. We will take a look at a few of the various perspectives with particular facts from those sources so that one may make his/her own determination on the subject.

First of all, the standard setting almost all water heater makers have their tanks fixed at is 140 degrees. If this is something you have never looked at, that may be what it is set at. Likewise, it can be tough to understand for certain exactly what the temperature setting is since sometimes the temperature level dial doesn’t have actual degrees printed on it, simply warm, hot, really hot … to some similar end. Many people think companies have a high pre-set temperature level to look remarkable to have a great deal of hot water – type of like attempting to produce great brand name recognition.

In regards to energy cost savings, simply by changing the water heater level from 140 to 120 degrees, will conserve somewhere between 6 to 10 % of energy usage. That translates to in between $6 to $20 annually most of the time.

Let’s begin off with possibly the most renowned reference, the U.S. Department of Energy. They recommend a setting of 120 degrees. The link to their website above provides decent details on the best ways to lower ones hot water usage and expenses. It is certainly worthy of a read.

There can be health dangers with having a temperature level setting that is too low. It can be revealed that Legionella bacteria has the best development range in between 68 to 122 degrees. It is presumed that 25 % of all water heaters are infected with Legionella bacteria at differing levels.

Legionella bacteria triggers a type of pneumonia and is transferred to human beings if one breathes in water infected with the bacteria – normally in showers and even AC systems. It is generally ok to consume the water. It is a problem when the germs get in ones lungs.

The Centers for Disease Control and Prevention approximates 8,000 to 18,000 Americans get the illness each year. 5 to 30 % of the instances are deadly.

According to OSHA, “At low levels of contamination, the chance of getting Legionnaires’ disease from a water source is very slight. The problem arises when high concentrations of the organism grow in water systems. Water heaters, cooling towers, and warm, stagnant water can provide ideal conditions for the growth of the organism.”  (read more)

There are scenarios when one is not going to need the water heater temperature level to be set at 140 degrees as well. If there are kids in your house or possibly with elderly people, this might be way too high of a temperature. The danger of becoming burned if the faucet was completely on hot water can be very great. Clearly, anybody living in the house that is at danger of contracting Legionella Disease need to have it set at 140 degrees.

Conclusion

So determine if there are any problems of individuals becoming burnt if the water temperature level is too hot. Likewise, be mindful of any individual that has issues of getting Legionella Disease. Given that the annual expense savings of turning the temperature level down is just about $20 many time with the typical house’s hot water use, it might be a great choice to maintain the temperature level above 120 degrees simply for the overall health related advantages; nevertheless, Water Heater Repair Riverside will let you make the call.

The following infographic sums up our discussion clearly:

Hot Water Heater Repair Riverside CA

Water Heater Winterizing

Posted by on Dec 1, 2014 in Water Heater Repair Riverside, Water Heating Savings | 0 comments

We love to pass along tips on how to conserve on energy expenses at home here at Water Heater Repair Riverside. Here are some of the best ways to get ones water heater ready for the winter months.

A simple method to examine ones water heater’s need for insulation is to put ones hand near to or on the outside of the storage tank. It is feels warm, insulating the tank is suggested. Throughout the winter season this heat loss you just felt can accumulate. Conversely in the summertime, if the water heater is located inside the home, and not in a garage, it can add heat to the space that you are trying to cool. The heat you feel is clearly heat being lost. If it is not warm at all that is a good indication that the tank’s internal insulation is in pretty good shape. Brand-new water heaters are being produced with a great quantity of internal insulation today. You can inspect the manufacture’s label to see what the R-value is. If it R-24 or greater, one should be in fantastic shape without having to add an insulation blanket to the water heater.

Riverside Water Heater Blankets

The treatment for this heat loss is with a water heater blanket or wrap. Initially check with your local energy company, for some have insulation kits at minimized costs for house owners. A hot water heater blanket will come in various sizes depending on the gallon size of the storage tank. The higher the R-value, the more insulation it has. We would suggest getting at least an R-11.

The blankets are easy to set up. They will come with insulation tape to finish the joints of the blanket. The shinny or vinyl side goes on the outside.

For gas water heaters, wrap it all around, leaving the top flue unwrapped, and unwrapped around the controller on the bottom. Likewise, do not wrap the T&P valve lever, or the bottom of tank for that is where air gets in. For electric water heaters, the top can be wrapped for there is not an exhaust flue, but do not wrap the heating-element access panels.

Water heater blankets will last a long period of time. You might even be able to make use of the very same one once more whenever the water heater is replaced, providing it’s the same size storage tank.

Water Heater Pipe Insulation

There are two kinds of pipe insulation that ought to be used for a water heater. For pipes that are within 6 inches of the water heater exhaust flue, fiberglass insulation wrap should be used and ought to be attached with either high temperature aluminum tape or wire. Foam insulation sleeves can be made use of for all the pipes that are further away then 6 inches of the flue then.

The U.S. Department of Energy recommends that house owners insulate a minimum of 6 feet of the pipe entering and out of the water heater. This will increase the temperature level at the faucets 2 to 4 degrees and conserve money on heating. We also recommend wrapping both the hot and cold pipes too simply due to the fact that every bit helps.

Energy Savings from Riverside Water Heater Insulation

Insulating an ineffective hot water heater can cut the expense of running that heater by 5 % to 10 %. Depending on the model, that can save anywhere from $5 to $20 per year, which means a water heater blanket can be paid for in 1 to 4 years. Adding insulation could decrease standby heat losses by 25 % – 45 % and conserve about 4 % – 9 % in water heating costs.

What others round the web are saying:


Riverside Water Heater Installation Costs

Posted by on Dec 1, 2014 in Water Heater Replacement Riverside | 0 comments

The average lifespan of a standard tank-style natural gas water heater or electric water heater is around 8 to 12 years, so the prospect of having to replace a water heater is a typical house improvement. Water Heater Repair Riverside has discussed some of the factors that affect the setup expenses here.

The costs to set up a new Riverside hot water heater do range in rate depending on the company carrying out the installation, and depending upon the type of unit set up. For example, energy-efficient tankless water heaters do cost more to set up, though those expenses can be recouped over the life of the device. Have a look at this tool from homewyse.com that will provide a quote on water heater setup expenses for the part of the nation one lives in.

Water Heater Installation Cost Factors

Without seeing the location that ones water heater will be installed or replaced, it is difficult to provide a certain idea of the expense. If it is a water heater replacement, and is being replaced with a comparable sized and style of heater, the setup costs will be extremely affordable. If one is changing to a different type of water heater, like from an electric to a gas or tankless unit, the installation costs will certainly be higher because we will have to potentially add gas lines and connections.

Another consideration is to make certain a replacement water heater will be up to code with what is needed now, not with what the code was 10 to 12 years earlier when the existing water heater was set up. Likewise, there is the potential that the present water heater was not up to code when it was initially set up either! Which can be the case if a previous property owner did the installation him or herself.

Because of the safety elements involved with water heating systems, it is definitely best to have an expert plumbing company perform the installation. One, many house owners will not have a good idea of exactly what the code requirements are. One threat factor is that electric water heaters use 240 volts of electricity, which is very unsafe to handle if not experienced in doing this. Water Heater Repair Riverside CA spends a lot of time dealing with incorrectly installed water heaters.

Another safety concern with not having an expert install ones water heater is working with natural gas lines. This, too, can be unsafe, and a situation where there can not be any leaks.

A final safety issue is with effectively venting the exhaust to ensure carbon monoxide leaves the home. Carbon monoxide gas poisoning happens more often than many people believe, and it is best to ensure one has a carbon monoxide detector in ones house too. According to the Centers for Disease Control, unintended carbon monoxide poisoning triggers 400 deaths each year and 20,000 visits to the emergency room.

Other factors to consider with installing is making certain it is plumbed properly, there is enough clearance and ensuring drip pans are equipped, if needed.

How to Prevent Riverside Water Heater Repairs

Posted by on Apr 1, 2014 in Water Heater Repair Riverside, Water Heater Replacement Riverside | 0 comments

Most do not ever think about the state of their water heater Water Heater Repair Riverside knows. Justifiably so, as long as it is functioning correctly. However, a little water heater service can go a long way toward minimizing the number and frequency of repairs, and actually helps to extend the life of the heater, staying clear of early replacement. Find out how maintaining your water heater can affect its lifespan and provide you less stunning moments of cold water.

A Healthy Riverside Water HeaterWater Heater Repair Riverside

While it is difficult to identify exactly how long a water heater ought to last, an effectively serviced, quality water heater can last 8 to 10 years. Naturally, many factors will impact the life-span, consisting of electrical power irregularities, the quality of the water heater, and the mineral density of ones water. Regular water heater service can also decrease electric costs by having it function more efficiently

One of things that destroys a water heater is mineral buildup. A lot of money is invested changing heating elements and entire tanks, when some upkeep along the way would assist to prevent this expense from occurring. A healthy water heater is one that is insulated, clean, and without wiring faults.

Issues with ones water heater usually become obvious: A hot water faucet fails to summon hot water, you see leaking or puddles near the storage tank, or the tank releases strange gurgling or popping sounds. These are a couple of sign informing you when your hot water heater needs replacing.

It would be nice to know before your water heater springs a leak and causes a trouble or worse yet damage to your house. If you determine you have a few of the very early sign you will have time to assess your selections of sizes and models and pick a qualified installer as opposed to rushing to discover a replacement water heater on a Friday afternoon or even worse on a weekend.

Below are some indications that you might be all set for a new hot water heater

Age: On average, your gas hot water heater must last anywhere between 8 to 12 years, while an electric design will last a bit longer at 10 to 15 years.
Stained Water: When you utilize your hot water tap, does the water look a bit tinted? If so, there could be rust in your water heater, which is a possible indicator your hot water heater is revealing indications of wear and may begin to leak.
Banging or Popping: When there is a accumulation of hard water sediment in the storage tank,it may could sound like explosions. These sounds are caused by the difference in water temperature inside the tank as new cold water mixes with the heated water of the tank.
Moisture: Look around the base of the water heater for dampness, for this could be a sign of a slow-moving or intermittent leakage.
Cold Water: An unanticipated cold shower is not just bad way to begin your day, however of a hot water heater that needs to be looked into.
Major Water Leaks: It’s time to call Water Heater Repair Riverside now.

Enhanced by Zemanta

10 Minute Riverside Water Heater Maintenance

Posted by on Feb 26, 2014 in Water Heater Repair Riverside | 0 comments

We are going to put you to work today, however just for about 10 minutes. Yep, that’s all it will take for these 2 crucial water heater upkeep tasks; nonetheless, Water Heater Repair Riverside knows they will do an excellent job of helping with 3 things:

  1. Having your water heater last as long as possible (that will conserve you cash).
  2. Making sure the water heater runs safely (we do not desire it to blow up).
  3. Having it run as energy efficiently as possible (likewise saving you cash).

So with that in mind, are you prepared to invest ten minutes once or twice a year to assist conserve some money? Water Heater Repair Riverside CA thought so.

Testing the T&P Relief Valve

Frequently called the T&P Valve, or the temperature and pressure relief valve, has a vital job. It helps ensure excess pressure does not build up inside the water storage tank, or in much more simple terms, it ensures the water heater does not explode. As the photo reveals, it has a lever or little deal with on it. All you need to do is raise it part means and then let go of it. Hopefully, it snapped back to its shut position quickly. If it is working effectively, a little water can be heard going into the drain pipe below the lever you just lifted and you maybe heard some pressure being released. If none of these things have actually taken place throughout the test, the valve will require to be changed.

As inspectapedia.com states: “dripping TP relief valves are unsafe. The hazard is that minerals in the water supply accumulate inside the valve during the passage of hot water through the valve assembly. That accumlation of scale will eventually block operation of the relief valve, causing the relief valve to fail to operate properly if unsafe pressure or temperature occurs in the water heater in the future. The risk, ultimately, is a water heater tank or heating boiler explosion.”  (read more…)

Do a Mimi Water Heater Tank Flush

By nature, rust and rust will happen inside the water storage tank thanks to the chemical reactions taking place with all the elements inside that are required to warm the water. We will not get too technical here, however it is simple to assist prevent this from happening by doing a flush or draining of all or some of the water in the storage tank.

For simply a small flush, put a container under the drain valve below the tank. Open the drain valve and fill the container with water. Drain a minimum of a couple of gallons of water in total. Let the water sit in the container for a couple of minutes to settle and examine if there is much that settles to the bottom of the container. If there is, if the water heater has actually not been drained for a very long time (or ever), it would be best to do a full flush of the tank to get as much of the sediment out as possible. You will want to turn the temperature level dial down and might wish to let the water cool down for about an hour initially so it is not too hot while draining it. Likewise, it would be easier to connect a hose to the drain valve and let the water go outside instead of making use of buckets.

If the water looks relatively clean and clear from the small test you should be all set. When the water heater has an excessive quantity of sediment inside of it, it can make loud popping noises and it minimizes its efficiency too.

Though water heaters are relatively upkeep free and simple to operate, whenever you feel the slightest uncomfortable or are unsure of exactly what to do, it is always best to have a plumbing expert help with the situation.

Water Heater Repair Riverside

Solving a Lack of Hot Water From Ones Riverside Water Heater

Posted by on Feb 22, 2014 in Plumbing Repair Riverside, Water Heater Repair Riverside | 0 comments

Let us break down the discussion on why one could not have any hot water from the water heater into two various sections: having NO hot water and having LIMITED hot water.

In terms of having no hot water at all, Water Heater Repair Riverside suggests that it is most likely due to the fact that of one of the following four different possibilities (a minimum of it is probably simply one). Here they are …Water Heater Repair Riverside

A Bad Pilot Light
Ideally this is the case since it is the simplest of the 5 to repair. First check to see that it is still lit. One may need to take a look at the owners manual (sorry guys, however often we have to read directions) if you are having a tough time finding where it is found. Manufacturers due have the tendency to conceal them nowadays it seems. And, to see exactly what the makers instructions are for relighting the pilot light.

Gas Line Leak
If one has a gas water heater, there might be a leakage in the line. If one has an electric one, obviously disregard this as a possibility. Some individuals have a difficult time smelling gas, though my mom has an exceptional ability to smell it I vividly remember as a child. It most likely will have the smell of rotten eggs. If this holds true, all jokes aside, turn the gas line off if one knows where it is and call the gas company and/or a plumbing business if one doesn’t live in Water Heater Repair Riverside CA’s service area. This is a major trouble that needs immediate attention!

A Bad Thermostat
This might be the problem for both not having any hot water, or just not having enough hot water. To be on the safe side we included it in this section though. Make sure the thermostat dial settings have not been bummed or altered by accident. Our water heater is found in the garage and the happy fingers of twin children like to go checking out once in a while. If the settings are what they typically are, turn the establishing some and see if it does the trick. The thermostat can be replaced for they do wear out periodically.

A Bad Thermocouple
For gas water heaters, the thermocouple works in hand with the pilot light as a security device. If the pilot light is out, it prevents gas from being switched on, so it is sort of crucial. Nonetheless, not difficult to alter if required. When the thermocouple begins to wear out, it “tells” the gas valve that the pilot is out so it shuts off the gas. The gas burner will not light then and the pilot goes out.

For electric water heaters, it utilizes a heating element inside to carry out the electrical current heating the water. These can likewise wear out and will lead to reduced hot water.

Insufficient Hot Water

Sediment Buildup
If one is not in the routine of flushing the water heater tank regularly, like at least once every couple years, sediment from the water will buildup in the bottom of the tank. If one ever hears popping or banging sounds from the storage tank, that is probably why. This will ultimately decrease the heaters capability to make adequate hot water. Regular flushing will usually address this problem. If the water in your home is excessively hard, making use of a water softener will help battle an excess amount of sediment accumulation too.

Other Possibilities
There may be an issue with the flame from the burner. Please make sure the location around and underneath the water heater stays clean from dirt. The water heater draws air up from underneath for the burner. Natural gas flames will burn bright blue with a yellow tip, while propane are more bluish green on the body of the flame.

It might be the case that the tank size is just too little and unable to deal with the water heating demands, but certainly if it is a new problem of not enough hot water and ones usage level has not considerably increased, this will not be the case.

If any current repairs were made on the system something can be crossed in terms of the electrical connections or the cold and hot water connects, however once more, pretty unlikely from the majority of plumbing companies.

There are other possible causes, however for the sake of time here, Water Heater Repair Riverside just desired to share the most probably ones. Do not hesitate to let us know of any help needed!

Enhanced by Zemanta